Special Deals
New Items
Popular H1 Parts

H1 Accessories
H1 Body Parts
H1 Brakes
H1 Central Tire Inflation
H1 Cooling System
H1 Differentials
H1 Electrical
H1 Engine
H1 Exhaust
H1 Exterior
H1 Fuel & Intake System
H1 Geared Hubs
H1 Halfshafts
H1 Heating & Air
H1 Interior
H1 Maintenance
H1 Manuals
H1 Miscellaneous
H1 Other
H1 Propshafts
H1 Remanufactured Parts
H1 Steering
H1 Suspension & Frame
H1 Tires
H1 Tools
H1 Transfer Case
H1 Transmission
H1 Wheels
H2 Differential
H2 Halfshafts

Differential Assy, Reman, 2.73:1 H1 Remanufactured Parts : Differential
Loading additional information...
Differential Assy, Reman, 2.73:1
Click to Enlarge

Differential Assembly, Remanufactured, 2.73:1

Remanufactured Differential Assembly With 2.73:1 Ratio And Torsen Type 1. Fits 1992-1998 Hummer H1, 10,300 GVW.

Manufacturer: SAX Reman
Part No: 2750-273-1
List Price: 
$1,450.00  EA
Core Price: 
$600.00  EA
Your Price: 
$1,195.00  EA
Similar Items
Your Price:  $0.00
Use 12342615 Differential Assembly, 2.73:1, Front / Rear
Part No: 6002483
We Also Recommend These Items
List Price:  $95.00
Core Price:  $50.00
Your Price:  $75.00
Output Flange, Reconditioned Output Flange, Reconditioned
Part No: 5593817R
Special Notes
1 Year/Unlimited Mileage Limited Warranty.

Core Charge is refundable upon return of your old unit. Cores returned that are a different ratio may be subject to reduced core credit. See our Core Policy for additional details.
Application Notes

In order to ensure that the warranty on your differential assembly is safe, please adhere to the following:

  1.   Do not remove the pinion yoke. The torque on the yoke is set to a specific preload range for the pinion bearings. Removing the yoke can severely impact this setting and cause premature bearing failure and potential damage to the ring and pinion gears. We will not warranty any units that have had the yoke removed.
    2.    Make sure that the vent line is properly attached to the differential. Loose or unattached vent lines can cause water intrusion as well as seal leaks. Units with evidence of water intrusion are not covered by warranty.
    3.    If your unit is equipped with an aftermarket locker, be sure to read and follow the pertinent instructions for installation, testing, and operation in the included manual from the manufacturer.
    4.    Use only factory recommended fluids in the unit and change it at the proper intervals. *Units with the Auburn ECTED locker installed should use only non-synthetic gear oil and one of the following friction additives: Ford p/n C8A219B546A or GM p/n 1052358*
    5.    After the first 500 miles from installation, it is necessary to change the fluid in the unit. It is not unusual to see more than the normal amount of small metallic particles on the drain plug magnet at this time, especially on units with an aftermarket locker installed. This is from break in. Large particles are not normal and could indicate a problem.

1992 - 1998AM GeneralHummer H1

Home / Catalog / Contact Us / Privacy Statement / Policies

©2013 SAX Express. All rights reserved. SAX Express is not affiliated with or endorsed by any vehicle manufacturer. Any trade names or brands used on this site are used for identification purposes only.